CAD drafting services perth

Specialist CAD design and drafting for Perth’s mining, resources, construction and engineering sectors — call 08 6103 8430

GET FREE NO OBLIGATION QUOTE — CALL 08 6103 8430

CAD Drafting Services in Perth

Perth sits at the centre of Australia’s resources economy, and ASTCAD has been serving Western Australian clients with specialist CAD drafting services for over a decade. From mining and oil & gas equipment documentation in the Pilbara and Kimberley regions, to structural and architectural drawings for Perth’s growing residential and commercial construction market, we deliver accurate, WA-compliant CAD solutions with a dedicated Perth contact number (08 6103 8430).

Perth engineers and project managers know the challenges of working in a resources-driven market: tight schedules, remote project coordination, and demanding technical standards. ASTCAD is built for this environment — we understand METS (Mining Equipment, Technology and Services) workflows, oil and gas P&ID documentation, and the specific structural requirements of remote site facilities.

Why Perth Clients Choose ASTCAD

Resources sector experience: Deep familiarity with mining, oil & gas, and minerals processing documentation — including P&IDs, plant layout drawings, and equipment fabrication drawings
WA planning knowledge: WAPC framework, DAP processes, and City of Perth council requirements
Dedicated Perth number: Call 08 6103 8430 directly
Remote project capability: Experience coordinating documentation for Pilbara, Goldfields, and Kimberley sites with FIFO teams

Perth CAD Drafting Services

Mechanical & Mining Equipment Drafting — Fabrication drawings, 3D models, and assembly documentation for Perth METS companies and mining OEMs
Oil & Gas Drafting — P&IDs, piping isometrics, instrument layouts, and process plant drawings for Perth oil and gas engineering firms
Structural Drafting — Steel shop drawings and structural documentation for Perth commercial and industrial construction
Architectural Drafting — DAP and building permit documentation compliant with WA planning and building codes
Civil Drafting — Subdivision, earthworks, road, and drainage drawings for Perth metro and regional WA projects
Electrical Drafting — Single-line diagrams and control panel layouts for Perth industrial and mining facilities

Perth’s Major Infrastructure Sectors — What ASTCAD Supports

Western Australia’s engineering and construction pipeline is among the most active in Australia. ASTCAD’s Perth clients span four dominant sectors, each with distinct documentation requirements:

Mining and METS — Kewdale, Welshpool, Henderson, Malaga

Perth’s industrial suburbs of Kewdale, Welshpool and Henderson form the backbone of WA’s METS sector — the cluster of Mining Equipment, Technology and Services companies that supply and maintain the Pilbara iron ore operations, Goldfields gold mines, and Kimberley projects. ASTCAD produces fabrication drawings for conveyors, screens, crushers and processing equipment to AS 1100 drawing standards; structural steel shop drawings to AS 4100 for modular skid frames and plant platforms; and 3D models in SolidWorks and Inventor for OEM equipment manufacturers based in the Malaga and Canning Vale industrial precincts.

Oil, Gas and LNG — Jandakot, Perth CBD, Henderson

Western Australia produces over 40% of Australia’s natural gas output, and Perth is home to the engineering offices serving the North West Shelf, Gorgon, Wheatstone and Browse LNG projects. ASTCAD’s oil and gas drafting capability covers P&ID preparation and mark-up to ISA 5.1 and AS 1627 standards; piping isometrics and spool drawings; instrument location drawings; and hazardous area classification drawings. Our teams are familiar with the document control requirements of major WA operators including Woodside, Chevron, and Santos.

Residential and Commercial Construction — WA Compliance Stack

Perth’s population growth — driven by the resources boom and interstate migration — has sustained one of Australia’s strongest residential construction pipelines through 2025–2026. All building documentation in WA must comply with the Building Act 2011 and Building Regulations 2012, the National Construction Code (NCC) 2022, and the Planning and Development Act 2005 for development approvals. For multi-storey residential and commercial projects, Metropolitan Region Scheme (MRS) zoning and Development Assessment Panel (DAP) approval documentation applies. ASTCAD prepares full DA and building permit drawing packages — including site plans, floor plans, elevations and sections, RCP, hydraulics coordination, and energy compliance documentation — for Perth architects and developers across the northern corridor (Alkimos, Eglinton, Yanchep), southern corridor (Baldivis, Byford, Mundijong), and established metro suburbs.

Remote Site Facility Documentation — Pilbara, Goldfields, Kimberley

ASTCAD has extensive experience producing documentation packages for remote WA mine site facilities — including accommodation camps, process plants, ROM pads, workshop buildings and reagent storage areas. These projects typically involve structural steel documentation to AS 4100 in cyclone wind region D (AS/NZS 1170.2), corrosion protection to C4/C5 categories (AS/NZS 2312), and dust and explosion hazard area classification. We coordinate drawing packages with structural engineers, mechanical engineers, and electrical engineers across multiple WA time zones and FIFO rosters.

Key Perth Industries and Regions We Serve

Mining and METS (Kewdale, Welshpool, Henderson, Malaga, Canning Vale)
Oil, gas and LNG engineering (Perth CBD, Jandakot, Henderson)
Residential and commercial construction (Perth CBD, Subiaco, northern and southern growth corridors)
Remote site facility documentation (Pilbara, Goldfields, Kimberley)

What a Perth Client Says

“A big thanks for helping us out on an extremely urgent project! Having found ASTCAD via Google, I approached the team with a 3D project that had a strict 24-hour deadline. They promptly stepped up and delivered a 3D model and renders that surpassed expectations.”
— John Petkovic, Workhouse Advertising, WA

Get a Free Quote for Perth CAD Drafting

Call our Perth line on 08 6103 8430 or email info@astcad.com.au. Free, no-obligation quotes for all Perth and Western Australian CAD drafting projects.

Frequently Asked Questions — Perth CAD Drafting

Can you handle mining and resources CAD documentation from Perth?

Yes, we regularly produce mining equipment fabrication drawings, plant layout plans, P&IDs, and remote site facility documentation for Perth-based engineering firms and mining companies across Western Australia. Our team is experienced with Australian standards including AS/NZS compliance requirements and understands the unique demands of WA mining operations, from Pilbara projects to offshore facilities.

Do you understand WA planning and building requirements?

Yes. Our team works with the WA Building Act 2011, Building Regulations 2012, Planning and Development Act 2005, and Metropolitan Region Scheme zoning requirements. For larger projects requiring DAP approval, we prepare the full drawing and report package for submission. We’re also familiar with WAPC development contribution requirements for the northern and southern corridors.

Can you coordinate documents for remote WA mine sites?

Yes, we have extensive experience coordinating CAD documentation for remote WA mine sites across the Pilbara, Goldfields, and Kimberley regions. We’re familiar with managing project deliverables for FIFO teams and remote site managers, ensuring all drawings comply with Australian standards and mining regulations. Our streamlined communication processes and digital file management systems keep your remote operations running smoothly.

What software formats do you deliver for Perth clients?

We deliver in all standard formats used by Perth engineering and mining firms: AutoCAD DWG/DXF (all versions back to 2010), PDF (ISO A1/A3 formats), SolidWorks SLDPRT/SLDASM, Autodesk Inventor IPT/IAM, Revit RVT, MicroStation DGN (commonly required by Pilbara iron ore operators), and STEP/IGES for 3D model exchange with fabricators. We can also work within your existing document management system (Aconex, ProjectWise, SharePoint) and match your company’s title block and drawing standards.